CP Executive train in Albany

CP Executive train in Albany

Monday, August 23, 2021

Bulk Handlers (North Albany)

Below is an undated shot of the Bulk Handlers facility in North Albany. The facility was originally built in the 1980s as a Container-On-Flat-Car (COFC) facility. From what I understand, there was even an overhead crane installed to help lift the containers on and off. This operation didn't last long,

The facility was later purchased by a company called Bulk Handlers who used it as a team track area to unload covered hoppers, boxcars, and tank cars. 

When I visited the place in 2005, it was still being used for this. I drove in one day and went around in my car taking pictures of what I found. No one there seemed to mind except one trucker who probably thought I was crazy. 

I don't know what was being carried in the covered hoppers, but it likely wasn't grain because only a few miles further south was a large Agway facility in the Port of Albany. 

On the end of one of the tracks was an old boxcar. A forty-footer too! I never bothered to get out and see what was inside, but I should have. I think it had been sitting there for a while.

Currently, the facility (shown in the satellite image below) is home to a tank farm and has been that way since I believe 2012. The satellite photo from below is oriented so that North is to the left. It is surrounded with fences and gates, so getting in to take pictures is not easy. I have considered stopping on the expressway (just visible on the left) to get a few shots but haven't yet. During the pandemic, the road was dead and that would have been the perfect time. Oh well.

An excellent satellite shot from 2012 can be found on this older blog post.

Lots of model railroaders install team tracks on their layout to justify being able to spot a variety of freight cars during an operating scheme. Here, there were five tracks at least during the 1980s and the types of cars included COFC flatcars, covered hoppers, boxcars, and tank cars. All in a compact area that would be easy to model. In fact, if I had more room on my layout I would consider doing this facility. In fact, it went through my head but I modeled the derelict North Albany rail yard instead. 

Thursday, August 19, 2021

C&CV Boxcars

There are certain types of  freight cars that I just find extremely fascinating. One that immediately jumps to mind are the Thrall All-door boxcars. There are just so many bars and levers and doors going on that it looks really busy and neat. 

Years ago, I was at the hobby store and found an HO scale model painted for the Cooperstown and Charlotte Valley Railroad (written about previously on my blog here). It was a Walthers' "limited edition" car from 2002 and there was mention somewhere that a two-pack of cars with different road numbers also existed. I asked the owner if he had that set, and after digging around he located it. They were the last ones in the store! I snatched them up and paid a bit more than I normally would for freight cars but since they couldn't be found on Ebay or anywhere else it I had to do it.

An excellent website resource with information on these cars is here, and it indicates that the CACV acquired six of the cars (#28070-28075) in 1974 which wore D&H markings until 1976. Another six cars (#28076-28081) were purchased in 1975, and they apparently never had D&H markings on them.

Sadly, I have never run them. The problem is that the cars are perfect for a 1970s layout, but not one set in 1984. I have some images of these cars and by that time they were patched out and labeled with new railroad owners. And they looked sloppy. Because I liked these models, I didn't want to do that to them. But, my sense of "historical realism" also prevented me from running the cars as is. So, they have sat in their boxes for years.

Recently, though, I came across the image below of car #28071 from April 1986. The D&H shield on the left is painted out and stenciled with "CACV", but beyond that the "Cooperstown & Charlotte Valley Railway" logo is still visible. Though some changes have been made, there aren't too many. This car wasn't patched out as ugly as some of the others. It doesn't even look very weathered in the image. Inspired by this, I might get the cars to the workbench this winter to make them layout ready. I would only need some black paint and some white or yellow letter decals. Then they would be good to go.


















At the same time, I also just purchased a pair of brand new O gauge (three rail) cars made by MTH Electric Trains in the same paint scheme. I am starting to collect O scale equipment for a future three-rail New England themed layout. Now, I have some really neat freight cars in two different scales. And I know Red Caboose made them in N scale too. Uh oh...

Sunday, August 15, 2021

Then and Now: North Albany (1986)

Here are two shots of the same area. The trains are heading north through North Albany. The first shows RS11 #5001 pulling a tank car train on 6/29/1986. The building on the near side of the tracks on the left is the old Terminal Millwork plant. The 1986 shot shows the abandoned siding to it still in place. Sadly, I have no idea what the building is behind the trains as it is though it still remains complete with the green trim visible in the one picture.

When I went trainspotting on 4/24/2005, I caught a mixed train pulled by Canadian Pacific engines. By this time, the and the siding was long gone. The facility on the left is now Noble Gas Solutions, which sells various types of gases in tanks. Whereas once I could park in the abandoned parking lot to take pictures, now it is surrounded by chain link fences. 

Wednesday, August 11, 2021

Reunion with the S&NC BL2 engines (2020)

In June of 2020 I took a day off and went up to photograph a pair of EMD BL2 engines, painted up for the defunct Saratoga and North Creek Railroad. Numbered #52 and #56, I knew that they were probably leaving the area within a few months and I wanted to photograph these rare engines before my chances disappeared. Only 59 total BL2s were built, and per Wikipedia only 7 survive today.

Right after I took the S&NC pictures I wrote about a trip I took with my parents to the midwest in 1997 and some trains I spotted then. In my blog post recalling the trip, I wrote fondly of spotting a BL2 in Wisconsin: "Of all the engines I saw on this trip, the BL2 it is probably the rarest..." Note in the picture below (from 1997) the blue engine towards the back of the line, that sort of looks like half of a GG1. It was still in its former Bangor & Aroostook Railroad blue scheme.

So, up until last summer I assumed that I had seen three total BL2 engines in my life... one in Wisconsin, and the two S&NC ones that were being stored on the Batten Kill Railroad.

Imagine my surprise when I recently did some online research and discovered the engine I had originally photographed in 1997 was one of the pair I had photographed last year! The 1997 picture was probably of Janesville and Southeastern #56, which at the time was part of the National Railroad Museum's collection in Green Bay, Wisconsin. Fast forward 23 years, and I just so happened to see it again near my house! I had traveled half-way across the country to photograph it the first time, and it traveled half-way across the country for me to photograph it again.

It is my understanding that both BL2 engines are being leased to the Hoosier Valley Railroad Museum, so it will be unlikely for me to spot them again anytime soon. But you never know...

Saturday, August 7, 2021

East Deerfield, MA (1982)

Here is a great summertime shot (8-14-1982) of East Deerfield Yard in Mass. I have been meaning to get out there are railfan but haven't made the time yet. Perhaps this fall.



Tuesday, August 3, 2021

Rohr Turboliners at Super Steel in Schenectady (2005)

Picture yourself as young adult in graduate school in a city away from your hometown for the very first time, with a working car and a map. That was exactly the situation I was in when I moved to Albany in 2004 for law school. After weathering through the first winter, I decided to do some train spotting in the spring. On April 22, 2005, I bought a paper road map at a gas station and saw several different rail lines that were worth exploring. 

As I described in an earlier post, I had ventured to the south side of Rotterdam Junction to check out what I thought was a still-operational West Shore Line. Unfortunately, it was abandoned by CSX in 2003 and was in the process of being torn up around in 2004, so when I arrived there wasn't anything to see. I was staring at a paper map showing a train line, but there were no train tracks! The excellent "Gino's Rail Page" has several links to pictures of the line, known as the Cushing Branch, including some taken in 2003. By then, the line sure looked dead.

I could hear active trains, though, and later discovered they were from the CSX tracks across the river. I recently railfanned there a couple of months ago, and had a great time.

Anyway, after an afternoon of seeing no trains and getting pretty confused I was pretty dejected and was slowly driving back to my apartment. I realized I had drunk a lot of water all afternoon and it suddenly wanted out. So, I pulled over on what I thought was an old country road and walked through some tall grass to take care of the situation. Imagine my surprise when I discovered old rusting Amtrak Rohr Turboliners sitting around!

I didn't know anything about it at the time, but later learned about New York State's failed attempt to rebuild these trainsets at what was called Super Steel in Schenectady, NY. The project was a fiasco for many reasons, costing the state $65 million without much to show for it. A close friend worked at NYSDOT and actually had the role of inventorying what was going on during the process. 

The failed Amtrak rebuild project is so filled with tension that even today on the popular Railroad.net forum threads about the Rohr Turboliner are locked and rarely opened to add new information. A lot of people have a lot of strong opinions about them, and the project in general.

Only a few years after these pictures were taken, Super Steel closed in late 2008 and the Turboliner era came to a close. It is my understanding that some of the Turboliner train cars were scrapped and others were reclaimed by Amtrak and used for police officer training (!).

Looking at these pictures is bittersweet for me. On one hand, I loved seeing these trains as a kid. But, these pictures show trains in various stages (covered in tarps, repaired/welded and in primer, and in old paint schemes) and it is a shame it never worked out. One of the lawsuits resulting from this was handled by several colleagues at work, and they had interesting stories to tell. But in the end, I will miss these trains. 

Thankfully, I will be able to recreate the good memories I have of them in the future, as I have one of the HO scale Rapido models on order and did so within an hour of being announced. 

Tuesday, July 27, 2021

Shay in Croghan, NY (2014)

Most of this week will find me up at a rustic cabin in Chaumont, NY, which is in the Thousand Island's region of the state. I go there once a year with a group of guys to play non-stop board games. Some games last 12 hours or more, and sometimes we might play several dozen shorter games. I frequently car pool with a friend who is a closet model railroader. He owns model trains, likes to go to train shows, has a basement, and belongs to the Union Pacific society... but doesn't have a layout! (He has kids, and would rather have a workshop, and wants a game room). 

There are times during the drive up when we parallel railroad tracks. On the Mohawk, Adirondack & Northern line I will frequently see endless strings of covered hoppers being stored. However, there isn't much to see on the (former?) Lowville and Beaver River RR line. Except a shay. 

A shay? In upstate New York? Yup, and right out in the open for anyone to see. In 2014, my friend and I detoured on the way through Croghan, NY, which is about ten miles northeast of Lowville and about 30-40 miles east of Watertown.

What's the shay doing there? According to the Railway Historical Society of Northern New York's website, the L&BRRR is owned by the Genesee Valley Transportation group of shortlines based in Batavia, NY. The shay, which belong to a Livingston Lansing, was donated to the RHSNY upon his death. Though the website mentions that an enginehouse was built for it, it has been outside for many years now.

Per the same website, the RHSNNY owns the Depot and plans to operate limited passenger service out of Croghan along the Lowville and Beaver River Railroad, one of the oldest operating shortlines in America. A vast collection of North Country railroad memorabilia and artifacts is on display at their museum.

Here is the interesting side of the shay. I have seen several 1/8 scale models operate, and even wrote an extensive article in a live steam magazine about them. I have several different sets of plans for them too, should I sometime decide to build one.

This is what the inside of the cab looked like.

To give perspective of how easy it is to access and photograph the engine, an apartment complex is shown in the background on the left. How cool would it be to live with a shay right outside your window?

The rear of the shay, with the sandbunkers on the back of the water tank.

Also on display was a snow plow. 

I have no idea if this engine will ever run again, but likely not in its current location. As a shay that presumably operated in New York State at one time (and that likely makes it the last one surviving) something should be done to preserve it for the future instead of letting it sit outside in the elements.

Recent online satellite pictures show that the engine and plow have been moved a little (it looks like the shay was pulled out and then backed in front of the plow, though I don't know why). As an aside, there was an article online about a start-up tourist train that was proposing to be based on Lowville. I wish them well.

Saturday, July 24, 2021

D&H train on Cohoes Bridge (1984)

Here is a shot from my collection of the D&H bridge in Cohoes, dated 4/07/1984. I actually had plans last year to try and take a picture of a current CP train on the bridge in the same position that this train was in, but it was a horrible failure. From what I can tell, the entire consist is Boston & Maine engines (including the lead engine, which appears to be a former all-black Penn Central patch out?) 

Perhaps this fall I can get back and try it again.

Tuesday, July 20, 2021

Staying at the Bridgeview Bed and Breakfast

Typically on my birthday I do something train related, and this year I hoped to spend the weekend at the Bridgeview Bed and Breakfast which is located just outside of Harrisburg, PA. It is situated literally where it is surrounded on several sides by busy railroad tracks, and overlooks the Susquehanna River (and a railroad bridge crossing it). I first became aware of this BNB after seeing an advertisement for it in a Trains magazine my sister-in-law gave me for Christmas. I tried to reserve one of their "best rooms" (the ones with the best views of the bridge) for Memorial Day but they were booked solid. However, I noticed that my wife's birthday fell on a Saturday in June and she always wanted to go back to Hershey Park, PA. So, a trip here seemed like it would allow us both to have a good time. Of course, I didn't mention where we were staying until the day before the trip.

We only had the weekend but I took Friday off from work, so we would have plenty of time on the drive down to explore other places too. Most importantly, I didn't want this to become a "railroad-themed" trip and wanted to do things my wife would enjoy too. Upon arriving at the BNB, I heard a train and immediately ran to the deck to take some pictures. As you can see, they have a lovely (this picture only shows 1/3 of the deck) porch to watch the trains and the Susquehanna River.

Sadly, it was rainy on Friday and Saturday evenings, causing me to watch the trains from inside for the most part. Some odd cloud and weather led to interesting pictures though.

As was shown on the satellite map above, the tracks surround the BNB on several sides. And they are very close. Observe the NS train passing on the other side of the building. It is partially hidden in the trees.

The name of the program escapes me, but there were television screens inside and out showing in real time the locations of trains approaching the bridge on a schematic display board. The red lines are where actual trains are, and the green lines show train routes that have been cleared. The Bridgeview BNB is in the very center of this map. 

Considering I was away for most of Friday and Saturday evenings, and also left around 10AM on Sunday morning, I estimate I saw at least 20 trains. There were many more I heard while lying in bed getting ready to sleep. None kept me up during the night. 

By the end, I didn't bother running to the window. It was cool to see so many, but most were Norfolk Southern and looked the same after a while. Two Amtrak trains pass during the mid-day but aside from that it is mostly NS. 

In all, it was a fun trip. I also fit in miniature golf, a day trip to HersheyPark which included a live-steam train ride and their water park (great on a 96-degree day), a visit to a restored Japanese house and garden, the Philadelphia Zoo, a Philly cheesesteak, a train store, and more. All in one weekend. I can't wait to go back!

Friday, July 16, 2021

Roundhouse "Lady Anne" gauge 1 live steamer

I have a passion for British steam locomotives, especially narrow-gauge ones. They are short, chunky, and frequently colorful. Roundhouse Engineering has been making 1/19 scale live steam locomotives since 1982, and the "Lady Anne" model was right there at the beginning. I have wanted one for many years... at least 15 if my old catalogs are any evidence of this.

After some very poor results with an Accucraft Ruby kit, I decided I had enough messing around and ordered a proper Lady Anne from Roundhouse during the summer of 2019. By the way, "Lady Anne" is the name of the model and as my wife's name includes "Anne" I am keeping it named as is. My engine was ordered in maroon, a color that is probably their most recognized for this model, though I custom ordered mine with a gloss black smokebox. This is how they used to come from the factory, but lately the smokeboxes are painted matte black and I wanted mine to match the model I dreamed about for years. The dome is also painted maroon to match the body but I recently ordered a plain, brass dome which is what they used to come with. 

I haven't been up to the Adirondack Live Steamers lately due to my illness and the pandemic, but this past weekend was Family Day and I thought it was a great time to try her out. They are already tested extensively at the factory upon assembly, but I had never run one before so I was a little apprehensive. I shouldn't have been. She performed well, though I frequently had the gas burner too high and produced wasteful amounts of steam. I will need to learn how to fire her properly, which likely means turning the gas burner down really low once pressure is up. My train consisted of three modified New Bright train set cars and one LGB car. Proper coaches are likely a winter project for next year.

She took two years from order placement to delivery, and along the way there was a mistake but it was easily corrected. And now I am very pleased with her.

I also took my Boston & Maine "Bluebird" engine for a spin (featured in the Jan/Feb issue of Live Steam & Outdoor Railroading magazine) and she ran really well. 

Overall, it was a very pleasant way to spend a Saturday afternoon.

Monday, July 12, 2021

Rome & Fort Bull Railroad (1980s)

Pop Quiz: name a two-foot gauge steam railroad that operated in upstate New York within the past 20 years? If any of you answered the Rome and Fort Bull Railroad, you would have been correct! It was a park ride that operated in the old Erie Canal Village in Rome, NY. I went there once or twice when visiting my grandparents who lived in Utica, and distinctly remember the train. It was an actual live steam locomotive, not a gas-powered engine dressed up to look like a steamer, and the track plan featured a straight run with return loops at each end. The pictures are from 1987 and 1988.

Based on internet research, it appears that in the last fifteen or so years of operation it had a 2-6-2 steamer, an 0-4-0 steamer, a Chance brand CP Huntington steam-profile diesel engine, and then an actual Plymouth diesel engine pull the train. 

This is a picture of me (the tall one with my blonde hair) and my brother when we rode the train in September 1987. Is it any wonder that I am still fascinated by both steam trains in general, and 2-foot gauge trains in particular?

Here is a better shot of the engine, now with my sister included. It is named the "Edward J. Nolan", and information found at a link below indicate that he built the engine originally in 15" gauge for his private track. 

If the chassis was rebuilt into a 24" gauge ride that would explain why the recycled drive and bogie wheels are so tiny compared to the rest of the engine. It almost looks toyish.

Ironically, in the picture below my brother seems more excited than I am to be on the train, but if you look closely I appear to be studying the couplers connecting the cars on the train. I have always loved staring at train details such as this and find it relaxing. 

Here is a nice shot showing the water tower. I imagine that they actually used it to fill the tender with water.

Here is a satellite image of the site, and the red lines I added are where the tracks ran. It was quite a nice set-up. As a kid I remember thinking that the switches were likely sprung on the return loops.

This last picture is from a 1970s-era postcard, and note that the cars don't have roofs.

Sadly, the Erie Canal Village has been shut down for many years and the whereabouts of the train itself are unknown. There are attempts to bring back the site as a historic place to visit, but the train tracks were pulled up and the trains taken away. However, this online board thread has some information regarding the whereabouts of the train equipment. Hopefully, someday... somewhere... they will operate again.

Thursday, July 8, 2021

D&H Geep #573 in Portland, ME

I haven't done much modeling lately because I have been working on a new kitchen floor for the wife. It has taken away a lot of my free time, and the summer heat (which I hate... give me snow any day) kills my desire to do anything but crash on the couch and read train books. 

But, I still run into neat pictures and here is one from July 03, 1984 in South Portland, Maine. It has D&H high-nose GP-7 #573, one of the very few first-generation geeps actually painted or lettered for the D&H. More information about her can be found here and here.  

Look at all the steam and/or smoke the engine is putting out. I don't think those are clouds in the background, but I might be wrong. Anyway, coupled with a B&M Geep it is making good progress with a mixed freight. And look at the condition of that track on the left of the mainline!